Index of /public/ftp/pub/linux/system/hardware
What you'll find here: hardware configuration utilities for your system
You can also view this index in terse format, or return to the parent directory.
- 
 - utility to set interval for IDE CDROM spin downs (2613 bytes)
 - 
 - set ISA bus speed on SiS 85c471 486 chipset (3424 bytes)
 - 
 - Configures some local bus IDE cards (4685 bytes)
 - 
 - Small utilities to read/set/backup BIOS/CMOS parameters, (8491 bytes)
 - 
 - allows you to control level 1 cache (3353 bytes)
 - 
 - A user program to maximally load an x86 CPU to generate maximum heat for stability testing (6805 bytes)
 - 
 - patch for Cyrix cache enabler (1448 bytes)
 - 
 - activate/tune 1kB cache on Cyrix chips (29191 bytes)
 - 
 - changes your dram refresh rate for speedup (14172 bytes)
 - 
 - xforms based tool for configuring Cyrix/IBM 6x86 CPU (21081 bytes)
 - 
 - Verilog source code for a frequency counter running on the Digilent Digilab D2 (860277 bytes)
 - 
 - board with Xilinx Spartan-2-200 FPGA (860054 bytes)
 - 
 - turns off guaranteed access timing for PCI (871 bytes)
 - 
 - get/set hard disk parameters for Linux IDE drives (114144 bytes)
 - 
 - hwcfg is a simple console program that shows the basic hardware configuration of the system (5758 bytes)
 - 
 - Version 2.24 -- Used to read and set the hardware clock (76172 bytes)
 - 
 - Utility that measures ISA i/o speed (6451 bytes)
 - 
 - ISA plug and play configuration utilities (706927 bytes)
 - 
 - ISA plug and play configuration utilities (499639 bytes)
 - 
 - Display, recording, and motion detection for the Q-tec 100 USB internet webcam. (736580 bytes)
 - 
 - driver code to drive LCD panels from the parallel port (7276 bytes)
 - 
 - Memtest-86 is very thorough, stand alone memory test for x86 systems. (131309 bytes)
 - 
 - programming utility for Xilinx FPGA based Digilent digilab board. (11507 bytes)
 - 
 - programming utility for Xilinx FPGA based Digilent digilab board. (11562 bytes)
 - 
 - Resolve your Plug-And-Pray gripes and problems (296500 bytes)
 - 
 - A program that interprets PS/2 mouse signals to X11 (5365 bytes)
 - 
 - power management for WD chipset based lap-tops (13194 bytes)
 - 
 - set boot device,ramdisk size,vidmode w/out recompiling (11199 bytes)
 - 
 - scans ISA io space for hardware devices (23540 bytes)
 - 
 - wmalms monitors sensor data: temperature, fan speed, voltage. (14340 bytes)
 - 
 - send format and other low-level SCSI commands to a device (5785 bytes)
 - 
 - a low-level SCSI drive start/stop program (5714 bytes)
 - 
 - sets 5x86 and 6x86 config registers (52838 bytes)
 - 
 - support for the shasta chipset (17597 bytes)
 - 
 - a simple utility that can be run in the background to control the fan of a Toshiba laptop (14036 bytes)
 - 
 - enables HDs to effectively spin down by delaying the flushing (4431 bytes)
 - 
 - misc control for veridata notebooks (7862 bytes)
 - 
 - watchdog program for real-time applications (14398 bytes)
 - 
 - wmalms monitors sensor data: temperature, fan speed, voltage. (38014 bytes)
 - 
 - wmalms monitors sensor data: temperature, fan speed, voltage. (77867 bytes)
 - 
 - wmalms monitors sensor data: temperature, fan speed, voltage. (74267 bytes)
 
Last updated by keeper@ibiblio.org using keeper 1.55 on 2010-03-11 19:35:13 UCT