# $NetBSD: Makefile,v 1.214.2.1 2024/07/03 18:38:54 martin Exp $ .include .include # Make sure that the ordered build/install processing applies when using # plain make. .MAIN: build_install # TOOLDIR must be valid, unless MKTOOLS=no .if ${MKTOOLS:Uyes} != "no" .if "${TOOLDIR}" == "" .error "TOOLDIR is undefined or empty" .elif "${TOOLDIR:tW:M/*}" == "" .error "TOOLDIR is not an absolute path: ${TOOLDIR}" #.elif !exists(TOOLDIR) # XXX .exists fails for directories #.error "TOOLDIR does not exist: ${TOOLDIR}" .endif .endif # MKTOOLS != no # TOOLS_BUILDRUMP == yes builds only the subset of the tools required # for building rump kernels and the hypervisor. It is typically used # when building rump kernels targeted for non-NetBSD systems (via # buildrump.sh), and should not be set for a regular "make build". TOOLS_BUILDRUMP?=no .if ${TOOLCHAIN_MISSING} == "no" . if (defined(HAVE_GCC) && ${HAVE_GCC} > 0) || \ (defined(HAVE_GDB) && ${HAVE_GDB} > 0 && ${MKCROSSGDB:Uno} != "no") TOOLCHAIN_BITS+= gmake .WAIT TOOLCHAIN_BITS+= gmp .WAIT TOOLCHAIN_BITS+= mpfr .WAIT TOOLCHAIN_BITS+= mpc .WAIT . endif TOOLCHAIN_BITS+= binutils .WAIT . if defined(HAVE_GCC) && ${HAVE_GCC} > 0 TOOLCHAIN_BITS+= gcc . endif . if defined(HAVE_GDB) && ${HAVE_GDB} > 0 && ${MKCROSSGDB:Uno} != "no" TOOLCHAIN_BITS+= gdb . endif TOOLCHAIN_BITS+= .WAIT .endif .if defined(HAVE_PCC) . if ${TOOLCHAIN_MISSING} == "no" TOOLCHAIN_BITS+= pcc . endif .endif .if ${TOOLCHAIN_MISSING} == "no" || defined(EXTERNAL_TOOLCHAIN) TOOLCHAIN_BITS+= dbsym mdsetimage .endif DTRACE_BITS= .if ${MKDTRACE} != "no" || ${MKCTF} != "no" DTRACE_BITS+= .WAIT elftoolchain DTRACE_BITS+= .WAIT libctf .endif .if ${MKCTF} != "no" DTRACE_BITS+= .WAIT ctfconvert ctfmerge .endif LINT_BITS= .if ${MKLINT} != "no" LINT_BITS= lint lint2 .endif # All of host-mkdep, compat, and binstall are needed before anything # else. Within this group, they must be built in a specific order, and # all of them must be built before any of them is installed. They may # be installed in any order. This can't be expressed using the .WAIT # notation inside the SUBDIR list. # # XXX .ORDER does not work when multiple targets are passed on the # make command line without "-j", so use dependencies in addition to .ORDER. # .ORDER: dependall-host-mkdep dependall-compat dependall-binstall \ dependall-date .if make(dependall-host-mkdep) && make(dependall-compat) dependall-compat: dependall-host-mkdep .endif .if make(dependall-compat) && make(dependall-binstall) dependall-binstall: dependall-compat .endif .if make(dependall-date) dependall-date: dependall-host-mkdep dependall-compat .endif # Dependencies in SUBDIR below ordered to maximize parallel ability. # See above for special treatment for host-mkdep, compat, and binstall. # SUBDIR= host-mkdep compat binstall date \ .WAIT mktemp .WAIT sed .WAIT genassym .if ${TOOLS_BUILDRUMP} == "no" SUBDIR+= cap_mkdb crunchgen ctags gencat hexdump \ ${LINT_BITS} \ makewhatis mtree nbperf .WAIT uudecode .endif SUBDIR+= cat rpcgen join lorder m4 mkdep tsort .WAIT yacc .WAIT awk .WAIT lex .if ${TOOLS_BUILDRUMP} == "no" SUBDIR+= xz-include .WAIT grep xz-lib pax .WAIT libprop SUBDIR += .WAIT texinfo \ .WAIT tic \ .WAIT ${TOOLCHAIN_BITS} \ ${DTRACE_BITS} \ asn1_compile cksum compile_et db \ file lint1 slc \ makefs sortinfo \ .WAIT menuc mkcsmapper mkesdb mklocale mknod msgc \ .WAIT disklabel gpt \ .WAIT paxctl \ .WAIT fdisk \ .WAIT installboot \ pwd_mkdb strfile sunlabel vgrind zic .endif SUBDIR+= stat .WAIT config .if ${TOOLS_BUILDRUMP} == "no" SUBDIR+= xz-bin .endif .if ${MKLLVM} != "no" || ${MKLLVMRT} != "no" SUBDIR+= \ llvm .WAIT \ llvm-lib/libLLVMDemangle llvm-lib/libLLVMSupport llvm-lib/libLLVMTableGen .WAIT \ llvm-tblgen .endif .if ${MKLLVM} != "no" SUBDIR+= \ llvm-clang-tblgen .endif .if ${MKLLVM} != "no" && !defined(EXTERNAL_TOOLCHAIN) SUBDIR+= \ .WAIT llvm-include .WAIT \ llvm-lib .WAIT \ llvm-clang .endif .if ${MKMAN} != "no" || ${MKDOC} != "no" || ${MKHTML} != "no" . if ${MKGROFF} != "no" SUBDIR+= groff . endif SUBDIR+= mandoc .endif .if ${TOOLS_BUILDRUMP} == "no" .if ${MKMAINTAINERTOOLS:Uno} != "no" SUBDIR+= autoconf .WAIT gettext .endif .if ${USE_PIGZGZIP} != "no" SUBDIR+= pigz .endif .if ${MACHINE} == "hppa" SUBDIR+= hppa-mkboot .endif .if ${MACHINE} == "ibmnws" SUBDIR+= ibmnws-ncdcs .endif .if ${MACHINE} == "macppc" SUBDIR+= macppc-fixcoff SUBDIR+= macppc_installboot .endif .if (${MACHINE} == "prep" || ${MACHINE} == "rs6000" || ${MACHINE} == "bebox") SUBDIR+= powerpc-mkbootimage .endif .if ${MACHINE_CPU} == "arm" SUBDIR+= arm-elf2aout .endif .if ${MACHINE_CPU} == "m68k" SUBDIR+= m68k-elf2aout .endif .if !empty(MACHINE_ARCH:Mmips*) SUBDIR+= mips-elf2ecoff .endif .if (${MACHINE} == "sgimips") SUBDIR+= sgivol .endif .if ${MACHINE} == "acorn32" SUBDIR+= sparkcrc .endif .if (${MACHINE_ARCH} == "sparc" || ${MACHINE_ARCH} == "sparc64") SUBDIR+= fgen .endif .if ${MACHINE} == "amiga" SUBDIR+= amiga-elf2bb SUBDIR+= amiga-txlt .endif .if ${MACHINE} == "hp300" SUBDIR+= hp300-mkboot .endif .if ${MACHINE} == "evbarm" \ && ${MACHINE_CPU} == "arm" \ && ${TARGET_ENDIANNESS} == "1234" SUBDIR+= elftosb .endif .if ${MACHINE} == "evbarm" || ${MACHINE} == "evbmips" || \ ${MACHINE} == "evbppc" || ${MACHINE} == "evbsh3" || \ ${MACHINE} == "sandpoint" SUBDIR+= mkubootimage .endif .if ${MACHINE} == "evbarm" || ${MACHINE} == "evbmips" || \ ${MACHINE} == "evbppc" || ${MACHINE} == "evbsh3" || \ ${MACHINE} == "sandpoint" || \ ${MACHINE_CPU} == "riscv" SUBDIR+= libfdt .WAIT SUBDIR+= dtc .endif .if ${MACHINE} == "mvme68k" SUBDIR+= mvme68k-wrtvid .endif .if ${MACHINE} == "mac68k" || ${MACHINE} == "macppc" SUBDIR+= mkhybrid .endif .if ${MKX11} != "no" SUBDIR+= makestrs SUBDIR+= makekeys .endif SUBDIR+= cvslatest .endif # TOOLS_BUILDRUMP != no check_MKTOOLS: .PHONY .NOTMAIN .if ${MKTOOLS:Uyes} == "no" @echo '*** WARNING: "MKTOOLS" is set to "no"; this will prevent building and' @echo '*** updating your host toolchain. This should be used only as a' @echo '*** temporary workaround for toolchain problems, as it will result' @echo '*** in version skew and build errors over time!' .endif .if ${MKTOOLS:Uyes} == "no" || ${USETOOLS} != "yes" # { SUBDIR= # empty realall realdepend install: check_MKTOOLS .endif # } .include .include .include .if !defined(PREVIOUSTOOLDIR) . if exists(PREVIOUSTOOLDIR) PREVIOUSTOOLDIR!= cat PREVIOUSTOOLDIR . else PREVIOUSTOOLDIR= . endif .endif CLEANFILES+= PREVIOUSTOOLDIR realall realdepend: .MAKE .if !empty(PREVIOUSTOOLDIR) && "${PREVIOUSTOOLDIR}" != "${TOOLDIR}" @echo "*** WARNING: TOOLDIR has moved?" @echo "*** PREVIOUSTOOLDIR '${PREVIOUSTOOLDIR}'" @echo "*** != TOOLDIR '${TOOLDIR}'" @echo "*** Cleaning mis-matched tools" rm -f PREVIOUSTOOLDIR (cd ${.CURDIR} && ${MAKE} PREVIOUSTOOLDIR=${TOOLDIR} cleandir) .endif echo ${TOOLDIR} >PREVIOUSTOOLDIR cleandir: rm -f ${CLEANFILES}