[NLUUG]   Welcome to ftp.nluug.nl
Current directory: /os/OpenBSD/3.6/
Current bandwidth utilization 260.68 Mbit/s
Bandwidth utilization bar
Contents of README:
Quick Install Instructions

If there are bugs found in this CD release, workaround information can
be found at http://www.OpenBSD.org/errata.html
Please refer to the following files on the three CDROM's for extensive
details on how to install OpenBSD 3.6 on your machine:




Other architectures are available on the FTP site, due to not fitting
onto the 3 CDs we are able to provide.

Quick installer information for people familiar with OpenBSD, and the
use of the "disklabel -E" command. If you are at all confused when
installing OpenBSD, read the relevant INSTALL.* file as listed above!


Play with your BIOS options, and see if you can enable booting from CD1.
Many older PCs have ROM bugs with CD booting. If CD booting fails, write
CD1:3.6/i386/floppy36.fs to a floppy, then boot that. Use floppyB36.fs instead
for greater scsi controller support, or floppyC36.fs for better laptop support.
If you are mixing OpenBSD with another operating system, you will want to
read the INSTALL.i386 document.


Please refer to the INSTALL.vax file.


If booting of CD2 fails, write CD2:3.6/amd64/floppy36.fs to a floppy,
then boot that.


Use CD2.  At poweron, hold down the 'c' key until the display turns
on and shows "OpenBSD/macppc Boot". Or at the Open Firmware prompt type
"boot cd:,ofwboot /3.6/macppc/bsd.rd"


To boot off CD3, type "boot cdrom 3.6/sparc/bsd.rd", or
"b sd(0,6,0)3.6/sparc/bsd.rd" depending on your ROM version.
Alternatively, write CD3:3.6/sparc/floppy36.fs to a floppy and boot
using "boot fd()" or "boot floppy" depending on your ROM version.
On machines using the Forth prom, you must use new mode.


To boot off CD3, type "boot cdrom".  Otherwise, write
CD3:3.6/sparc64/floppy36.fs to a floppy and boot it using "boot floppy"
or write CD3:3.6/sparc64/miniroot36.fs to the swap partition on the
disk and use the PROM to boot from that partition using "boot disk:b".

CD 2 track 2 is an audio track of the "Pond-erosa Puff (live)" song.
Vocals, Lyrics, Melody and Co-Arrangement by Ty Semaka. Guitar by
Chantal Vitalis. Bass by Jonny Nordstrom. Drums by John McNiel,
Fiddle - Co-Arrangement, Recording, Mixing, Mastering by Jonathan
Lewis of Moxam Studios (1-403-233-0350).

Source Code Use

CD#3 contains src.tar.gz.  Using this tree it is possible to get a
head-start on using the anoncvs servers as described at
http://www.OpenBSD.org/anoncvs.html. Using these files results in a much
faster initial CVS update than you could expect from a fresh checkout of
the full OpenBSD source tree. There are two ways of using the CD:

Copy the tree off it, (assuming the CD is mounted on /mnt):

# cd /usr/src
# tar xvfz /mnt/src.tar.gz

After this, /usr/src will be a checkout area where all cvs(1) commands
will work OK. Refer to http://www.OpenBSD.org/anoncvs.html for more

CD#3 also contains the following:
Changelogs/      This is all of the CVS commit logs we have generated while
		 working on the project.
ports.tar.gz     Our ports tree. Refer to CD3:/PORTS
XF4.tar.gz       A CVS checkout of our version of the XFree86 source tree.

Important man pages to read are config(8) and options(4), which will
describe in detail how kernels are built.

Further Notes:

To make a floppy under MS-DOS, use CD1:/3.6/tools/rawrite.exe.
Under Unix, use "dd if=<file> of=/dev/<device> bs=32k" (where device could
be "floppy" or "rfd0c" or "rfd0a"). To write a floppy under NT, use
CD1:/3.6/tools/ntrw.exe instead. Use properly formatted perfect floppies
with NO BAD BLOCKS or you will lose.

Installing Packages

The OpenBSD CD-ROM ships with several applications pre-built for various
hardware architectures.  We call these things packages.  The number of
applications vary according to available disk space.  Check the
directory 3.6/packages/<arch> to see which packages are available for
your hardware architecture.

To install one or more of these packages you must
1) become the superuser (root)
2) mount the appropriate CD-ROM
3) use the ``pkg_add'' command to install the software

Example (in which we use su(1) to get superuser privileges, thus you
have to be in group "wheel", see the manual page for su(1)).

$ su
Password: <enter your root password>
# mkdir -p /cdrom
# mount /dev/cd0a /cdrom
# cd /cdrom/3.6/packages/<arch>
# pkg_add <package-name1> <package-name2> ...
# <add more packages if desired>
# umount /cdrom

Your hardware architecture can be determined by issuing the command
``arch''.  The response will be something like ``OpenBSD.sparc''.
``sparc'' is the architecture.  The various m68k architectures share packages.

Package names are usually the application name and version with .tgz
appended, e.g. emacs-21.3.tgz.  Some packages -- pgp for example -- can
not be placed on the CD-ROM due to patent or other restrictions.
To obtain such packages use the command:

# pkg_add ftp://ftp.openbsd.org/pub/OpenBSD/3.6/packages/<arch>/<package-name>

File System Layout

The following are suggested sub-tree sizes for a full system install.
The numbers include enough extra space to permit you to run a typical
home system that is connected to the internet:

SYSTEM	/	/usr	/var	/usr/X11R6
alpha		60MB	450MB	200MB	160MB
amd64		60MB	450MB	200MB	160MB
cats		60MB	250MB	200MB	160MB
hp300		60MB	250MB	200MB	 50MB
hppa		60MB	250MB	200MB	160MB
i386		60MB	250MB	200MB	 85MB
mac68k		60MB	250MB	200MB	 75MB
macppc		60MB	450MB	200MB	160MB
mvme68k		60MB	250MB	200MB	 60MB (no Xserver)
mvme88k		60MB	400MB	200MB	160MB (static, no Xserver)
sparc		60MB	250MB	200MB	 50MB
sparc64		60MB	450MB	200MB	160MB
vax		60MB	450MB	200MB	160MB (static)

When you are in the disklabel editor, you may choose to make your entire
system have just an 'a' and 'b' partition. The 'a' partition you set up
in disklabel will become your root partition, which should be the sum of
all the 3 main values above (/, /usr, and /var) plus some space for
/tmp. The 'b' partition you set up automatically becomes your system
swap partition -- we recommend a minimum of 32MB but if you have disk to
spare make it at least 64MB. However, we recommend you use many separate
partitions so that users cannot fill up your important partitions as
easily, thus causing nasty denial of service problems. If you are extra
cautious, you will make at least the following separate partitions:

/ swap /usr /var /tmp /usr/local /usr/X11R6 /home.

OpenBSD is free software

You can do with it as you like, subject to very few conditions
(described at www.OpenBSD.org/policy.html).  But free software isn't
written without money. Network links, hardware costs, release
engineering and testing work; all these things take money and
significant effort on the part of those who have made this what it is.
Please reward the developers who have made OpenBSD what it is, YOU can
donate funds or hardware to get your name listed on our Donations page
www.OpenBSD.org/donations.html. Contact Theo de Raadt or send a donation
cheque in Canadian or US funds to:

812 - 23rd Ave SE
Calgary, Alberta
Canada T2G 1N8

(Make the cheque out to "Theo de Raadt": cheques made out to "OpenBSD"
cannot be cashed)

No major funding or cost-sharing of the project comes from any company
or educational institution. Theo works full-time on improving OpenBSD
and paying bills, many other developers expend spend significant
quantities of time as well.

Ongoing operating funds for the project are generated by sales of CDs,
tshirts, and posters, so if you like yours, please buy one for a friend.

Please be generous, and OpenBSD will keep making a release every 6
months.  This is our 16th release on CDROM, and we certainly hope we
can continue!

- Thanks to everyone who has purchased an OpenBSD CD-ROM.

Icon  Name                    Last modified      Size  
[DIR] Parent Directory - [DIR] Changelogs/ 23-Sep-2004 00:36 - [DIR] alpha/ 30-Oct-2004 05:33 - [DIR] amd64/ 30-Oct-2004 05:33 - [DIR] cats/ 30-Oct-2004 05:33 - [DIR] hp300/ 30-Oct-2004 05:33 - [DIR] hppa/ 30-Oct-2004 05:33 - [DIR] i386/ 05-Sep-2005 08:47 - [DIR] luna88k/ 30-Oct-2004 05:33 - [DIR] mac68k/ 30-Oct-2004 05:33 - [DIR] macppc/ 30-Oct-2004 05:33 - [DIR] mvme68k/ 30-Oct-2004 05:33 - [DIR] mvme88k/ 30-Oct-2004 05:33 - [DIR] packages/ 01-Oct-2004 12:33 - [DIR] sparc/ 30-Oct-2004 05:33 - [DIR] sparc64/ 30-Oct-2004 05:33 - [DIR] tools/ 23-Sep-2004 03:31 - [DIR] vax/ 30-Oct-2004 05:33 - [TXT] ANNOUNCEMENT 29-Oct-2004 18:09 20K [   ] HARDWARE 16-Sep-2004 08:32 3.0K [TXT] PACKAGES 16-Sep-2004 08:32 81K [TXT] PORTS 16-Sep-2004 08:32 2.3K [TXT] README 01-Nov-2004 21:50 7.7K [TXT] SIZES 16-Sep-2004 08:32 1.4K [   ] XF4.tar.gz 16-Sep-2004 08:33 61M [   ] ftplist 29-Oct-2004 05:37 7.3K [   ] ports.tar.gz 16-Sep-2004 08:31 7.2M [   ] root.mail 16-Sep-2004 08:33 80K [   ] src.tar.gz 21-Sep-2004 01:11 98M [   ] sys.tar.gz 12-Nov-2004 19:24 15M

NLUUG - Open Systems. Open Standards
Become a member and get discounts on conferences and more, see the NLUUG website!