#! /bin/sh
# $OpenLDAP$
## This work is part of OpenLDAP Software <http://www.openldap.org/>.
##
## Copyright 1998-2021 The OpenLDAP Foundation.
## All rights reserved.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted only as authorized by the OpenLDAP
## Public License.
##
## A copy of this license is available in the file LICENSE in the
## top-level directory of the distribution or, alternatively, at
## <http://www.OpenLDAP.org/license.html>.

echo "running defines.sh"
. $SRCDIR/scripts/defines.sh

mkdir -p $TESTDIR $DBDIR1 $DBDIR2

$SLAPPASSWD -g -n >$CONFIGPWF
echo "rootpw `$SLAPPASSWD -T $CONFIGPWF`" >$TESTDIR/configpw.conf

if test $AC_lloadd = lloaddyes ; then
    echo "Load balancer module not available, skipping..."
    exit 0
fi

# Monitor counts are unstable in the face of concurrency, since different
# clients may get different upstreams assigned for their operations. This might
# also change later when tiered load balancing is available.
# Another constraint is that some global counts are updated by the statistics
# collection task scheduled to run every second.
#
# This test assumes current round-robin policy:
# - default backend is rotated every time we successfully pick an upstream
# - upstream connections within the same backend are rotated in the same way
# - the monitor entry order for upstream connections reflects the connection
#   order within its CIRCLEQ_

echo "Starting the first slapd on TCP/IP port $PORT2..."
. $CONFFILTER $BACKEND < $CONF > $CONF2
$SLAPADD -f $CONF2 -l $LDIFORDERED
RC=$?
if test $RC != 0 ; then
    echo "slapadd failed ($RC)!"
    exit $RC
fi

echo "Running slapindex to index slapd database..."
$SLAPINDEX -f $CONF2
RC=$?
if test $RC != 0 ; then
    echo "warning: slapindex failed ($RC)"
    echo "  assuming no indexing support"
fi

$SLAPD -f $CONF2 -h $URI2 -d $LVL > $LOG2 2>&1 &
PID=$!
if test $WAIT != 0 ; then
    echo PID $PID
    read foo
fi
PID2="$PID"
KILLPIDS="$PID"

echo "Testing slapd searching..."
for i in 0 1 2 3 4 5; do
    $LDAPSEARCH -s base -b "$MONITOR" -H $URI2 \
        '(objectclass=*)' > /dev/null 2>&1
    RC=$?
    if test $RC = 0 ; then
        break
    fi
    echo "Waiting $SLEEP1 seconds for slapd to start..."
    sleep $SLEEP1
done
if test $RC != 0 ; then
    echo "ldapsearch failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Running slapadd to build slapd database..."
. $CONFFILTER $BACKEND < $CONFTWO > $CONF3
$SLAPADD -f $CONF3 -l $LDIFORDERED
RC=$?
if test $RC != 0 ; then
    echo "slapadd failed ($RC)!"
    exit $RC
fi

echo "Running slapindex to index slapd database..."
$SLAPINDEX -f $CONF3
RC=$?
if test $RC != 0 ; then
    echo "warning: slapindex failed ($RC)"
    echo "  assuming no indexing support"
fi

echo "Starting second slapd on TCP/IP port $PORT3..."
$SLAPD -f $CONF3 -h $URI3 -d $LVL > $LOG3 2>&1 &
PID=$!
if test $WAIT != 0 ; then
    echo PID $PID
    read foo
fi
PID3="$PID"
KILLPIDS="$KILLPIDS $PID"

sleep $SLEEP0

echo "Testing slapd searching..."
for i in 0 1 2 3 4 5; do
    $LDAPSEARCH -s base -b "$MONITOR" -H $URI3 \
        '(objectclass=*)' > /dev/null 2>&1
    RC=$?
    if test $RC = 0 ; then
        break
    fi
    echo "Waiting $SLEEP1 seconds for slapd to start..."
    sleep $SLEEP1
done
if test $RC != 0 ; then
    echo "ldapsearch failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Starting lloadd on TCP/IP port $PORT1..."
. $CONFFILTER $BACKEND < $LLOADDEMPTYCONF > $CONF1.lloadd
. $CONFFILTER $BACKEND < $SLAPDLLOADCONF > $CONF1.slapd
$SLAPD -f $CONF1.slapd -h $URI6 -d $LVL > $LOG1 2>&1 &
PID=$!
if test $WAIT != 0 ; then
    echo PID $PID
    read foo
fi
KILLPIDS="$KILLPIDS $PID"

echo "Testing slapd searching..."
for i in 0 1 2 3 4 5; do
    $LDAPSEARCH -s base -b "$MONITOR" -H $URI6 \
        '(objectclass=*)' > /dev/null 2>&1
    RC=$?
    if test $RC = 0 ; then
        break
    fi
    echo "Waiting $SLEEP1 seconds for lloadd to start..."
    sleep $SLEEP1
done

if test $RC != 0 ; then
    echo "ldapsearch failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Sending a search request to prime the counters..."
$LDAPSEARCH -b "$BASEDN" -s base -H $URI1 >> $TESTOUT 2>&1
RC=$?
if test $RC != 52 ; then
    echo "ldapsearch should have failed ($RC != 52)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Retrieving data from cn=monitor..."
echo "# Retrieving data from an empty lload's cn=monitor..." >>$SEARCHOUT
echo "# Operations received:" >>$SEARCHOUT
echo "#     Bind: 1 (0 forwarded)" >>$SEARCHOUT
echo "#     Search: 0" >>$SEARCHOUT
echo "#     Unbind: 1" >>$SEARCHOUT
$LDAPSEARCH -b "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \
    olmBalancer olmBalancerServer olmBalancerOperation olmBalancerConnection >> $SEARCHOUT 2>&1
RC=$?
if test $RC != 0 ; then
    echo "ldapsearch failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Adding first backend server..."
$LDAPMODIFY -D cn=config -H $URI6 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
dn: cn=first,olcBackend={0}lload,cn=config
changetype: add
objectClass: olcBkLloadBackendConfig
olcBkLloadBackendUri: $URI2
olcBkLloadMaxPendingConns: 3
olcBkLloadMaxPendingOps: 5
olcBkLloadRetry: 1000
olcBkLloadNumconns: 2
olcBkLloadBindconns: 2
EOF
RC=$?
if test $RC != 0 ; then
    echo "ldapadd failed for backend ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

# At the moment, the global counters are updated by a recurring job,
# wait for it to settle
echo "Waiting until connections are established..."
for i in 0 1 2 3 4 5; do
    $LDAPCOMPARE "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \
        'olmOutgoingConnections:4' > /dev/null 2>&1
    RC=$?
    if test $RC = 6 ; then
        break
    fi
    echo "Waiting $SLEEP1 seconds until connections are established..."
    sleep $SLEEP1
done
if test $RC != 6 ; then
    echo "ldapcompare failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Retrieving data from cn=monitor again..."
echo >>$SEARCHOUT
echo "# Retrieving data from lload's cn=monitor..." >>$SEARCHOUT
$LDAPSEARCH -b "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \
    olmBalancer olmBalancerServer olmBalancerOperation olmBalancerConnection >> $SEARCHOUT 2>&1
RC=$?
if test $RC != 0 ; then
    echo "ldapsearch failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Adding another backend server..."
$LDAPMODIFY -D cn=config -H $URI6 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
dn: cn=server 2,olcBackend={0}lload,cn=config
changetype: add
objectClass: olcBkLloadBackendConfig
olcBkLloadBackendUri: $URI3
olcBkLloadMaxPendingConns: 3
olcBkLloadMaxPendingOps: 5
olcBkLloadRetry: 1000
olcBkLloadNumconns: 4
olcBkLloadBindconns: 5
EOF
RC=$?
if test $RC != 0 ; then
    echo "ldapadd failed for backend ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

# At the moment, the global counters are updated by a recurring job,
# wait for it to settle
echo "Waiting until connections are established..."
for i in 0 1 2 3 4 5; do
    $LDAPCOMPARE "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \
        'olmOutgoingConnections:13' > /dev/null 2>&1
    RC=$?
    if test $RC = 6 ; then
        break
    fi
    echo "Waiting $SLEEP1 seconds until connections are established..."
    sleep $SLEEP1
done
if test $RC != 6 ; then
    echo "ldapcompare failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Sending another search request..."
$LDAPSEARCH -b "$BASEDN" -s base -H $URI1 >> $TESTOUT 2>&1
RC=$?
if test $RC != 0 ; then
    echo "ldapsearch failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Sending a WhoAmI? request..."
$LDAPWHOAMI -D "$BABSDN" -w bjensen -H $URI1 >> $TESTOUT 2>&1
RC=$?
if test $RC != 0 ; then
    echo "ldapwhoami failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

# At the moment, the global counters are updated by a recurring job,
# wait for it to settle
echo "Waiting until global counters are updated..."
for i in 0 1 2 3 4 5; do
    $LDAPCOMPARE "cn=Other,cn=Operations,cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \
        'olmCompletedOps:2' > /dev/null 2>&1
    RC=$?
    if test $RC = 6 ; then
        break
    fi
    echo "Waiting $SLEEP1 seconds until connections are established..."
    sleep $SLEEP1
done
if test $RC != 6 ; then
    echo "ldapcompare failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

echo "Retrieving data from cn=monitor again..."
echo >>$SEARCHOUT
echo "# Retrieving data after a search+WhoAmI?..." >>$SEARCHOUT
echo "# Operations received:" >>$SEARCHOUT
echo "#     Bind: 3 (2 forwarded)" >>$SEARCHOUT
echo "#     Search: 1" >>$SEARCHOUT
echo "#     Extended: 1 (WhoAmI?)" >>$SEARCHOUT
echo "#     Unbind: 3" >>$SEARCHOUT
$LDAPSEARCH -b "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \
    olmBalancer olmBalancerServer olmBalancerOperation olmBalancerConnection >> $SEARCHOUT 2>&1
RC=$?
if test $RC != 0 ; then
    echo "ldapsearch failed ($RC)!"
    test $KILLSERVERS != no && kill -HUP $KILLPIDS
    exit $RC
fi

test $KILLSERVERS != no && kill -HUP $KILLPIDS

LDIF=$DATADIR/lloadd/monitor.ldif

echo "Filtering ldapsearch results..."
$LDIFFILTER < $SEARCHOUT > $SEARCHFLT
echo "Filtering original ldif used to create database..."
$LDIFFILTER < $LDIF > $LDIFFLT
echo "Comparing filter output..."
$CMP $SEARCHFLT $LDIFFLT > $CMPOUT

if test $? != 0 ; then
    echo "Comparison failed"
    exit 1
fi

echo ">>>>> Test succeeded"

test $KILLSERVERS != no && wait

exit 0